Description
This is a PoE+ ethernet port made by Petenet (pronounced ‘pet-net’). This switch is specifically designed for use in video surveillance applications. All Petenet switches have a neat toggle switch that allows you to activate four functions:
- VLAN: Ports 1-4 will be unable to communicate with each other. They can only pass data to the uplink port.
- Extend: Ports 1-4 can transmit power and data up to 250m over Cat5e or Cat6 cable – however the network speed of these ports are reduced to 10 Mbps.
- Watchdog: If a network port has a data link for 2-3 minutes WITHOUT data transmission, the port will automatically reboot. This will attempt to reboot and fix the camera’s connectivity issue.
- QOS: The ports with a yellow colour underneath will have a higher priority than other ports. This is helpful if these ports are used to connect Wireless APs or directly to a computer.
All Petenet switches use Realtek PoE chipsets, ensuring there are no issues with any network camera. These chips are standardized and used in all types of devices worldwide.
Specification
tr>Network Media10 Mbps: Cat 3,4,5 Unsheilded Cable
100 Mbps: Cat5, 5E Unsheilded Cabletr>Power Output12VDC/1Atr>IndicatorsPower
| Item | Description | ||||||||
| No of channels | 1 (PoE IN) into 4 (PoE OUT) | ||||||||
| Ports | 1 x 10/100 RJ45 PoE Port (Data + Power IN) 1 x 10/100M RJ45 LAN Port (Only DATA) 1 x DC Jack (DC OUT) |
||||||||
| Pass through Data Rates | 10/100 Mbps | ||||||||
| Input Power Requirements | DC Input Voltage: 42 to 57 Vac | ||||||||
| Connectors | Shielded RJ-45, EIA 568A and 568B | ||||||||
| Regulatory Compliance | IEEE 802.3af(15.4W) (PoE) IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) |
||||||||
| Environment Conditions | Operating ambient temperature: 0 to 40°C Operating humidity: Maximum 90%, Non-condensing Storage Temperature: -20 to 70°C Storage Humidity: Maximum 95%, Non-condensing |
||||||||
